Soundproofing

Soundproofing guides

Practical, plain-English guides to costs, rules and getting the job done right.

How Much Does Soundproofing Cost in the UK?

Soundproofing a typical UK room costs £700–£3,800. A slim resilient party wall system costs £1,200–£2,200, an independent stud party wall £1,800–£3,200, a ceiling £1,800–£3,800, a timber floor £1,200–£2,800 and an internal stud wall upgrade £700–£1,500. A flanking survey and gap sealing costs £250–£650. Room size, the type of noise and how much space you can lose drive the price.

Read the guide →

Airborne vs Impact Noise: Which Soundproofing Do You Need?

Airborne noise is sound that travels through the air, such as voices, televisions, music and barking, and is reduced by adding mass, decoupling surfaces and sealing gaps. Impact noise is caused by something striking the structure, such as footsteps, dropped objects and doors, and travels through floors and walls. It is best treated at the source with resilient layers or floating floors. Most homes need treatment for both.

Read the guide →

How to Soundproof a Party Wall: Methods Compared

To soundproof a party wall, build a new lining in front of it that is isolated from the existing wall, fill the cavity with acoustic mineral wool, finish with two layers of dense acoustic plasterboard and seal every edge and socket. A slim resilient system costs £1,200–£2,200 and loses around 50–75 mm. An independent stud system costs £1,800–£3,200, loses more space and performs better.

Read the guide →

How to Soundproof a Ceiling Against Noise from Upstairs

To soundproof a ceiling, remove or build below the existing ceiling, fill the joist void with acoustic mineral wool, fit resilient bars or independent joists so the new ceiling is isolated, then fit two layers of dense acoustic plasterboard and seal the edges. Ceiling soundproofing typically costs £1,800–£3,800 for a room and loses around 50–125 mm of height. Footstep noise is reduced but best treated from above.

Read the guide →

Approved Document E and Sound Testing Explained

Approved Document E gives the sound insulation standards for walls and floors separating dwellings in England. It applies to new homes and to material changes of use such as converting houses into flats. Pre-completion sound testing is normally required to show separating walls and floors meet minimum airborne and impact values. Conversions have slightly lower targets than new builds. Poor detailing and flanking are the main reasons tests fail.

Read the guide →

Soundproofing glossary →

Get a free soundproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote