Soundproofing

Guide · Homeowners · 3 min read · Updated 17 November 2026

Airborne vs Impact Noise: Which Soundproofing Do You Need?

Short answer

Airborne noise is sound that travels through the air, such as voices, televisions, music and barking, and is reduced by adding mass, decoupling surfaces and sealing gaps. Impact noise is caused by something striking the structure, such as footsteps, dropped objects and doors, and travels through floors and walls. It is best treated at the source with resilient layers or floating floors. Most homes need treatment for both.

Airborne vs Impact Noise: Which Soundproofing Do You Need?

What airborne noise is

Airborne noise starts as sound waves in the air. When those waves hit a wall or ceiling, they make it vibrate slightly, and that vibration radiates sound into the room on the other side. Voices, television, music, dogs barking and traffic outside are all airborne. Light walls vibrate easily, so they let more sound through. Gaps let sound straight through with no resistance at all, which is why an air path round a door or a back-to-back socket box can undo expensive work.

The most effective treatments add mass, separate the new surface from the existing structure, absorb sound inside the cavity and seal every gap.

What impact noise is

Impact noise starts when something hits the building structure directly. Footsteps on a floor, heels on hard flooring, chairs scraping, doors slamming and washing machines on spin all put energy straight into joists, floorboards and walls. That vibration travels through the structure, sometimes across several rooms, and radiates as sound elsewhere.

Because it travels through solid connections, impact noise is hard to block once it is in the structure. The most effective approach is to stop it entering in the first place, using resilient layers under the floor finish, acoustic mats, floating floors and isolated ceiling systems.

How to tell which you have

Many people have both, but one is usually the main problem. Listen carefully to what you hear and where it seems to come from.

What you hearNoise typeMost effective treatment
Neighbours talking, television, musicAirborneMass, decoupling and sealing on the wall or ceiling
Footsteps and thuds from aboveImpactAcoustic floor on the floor above
Bass from speakers through a wallAirborne, low frequencyIndependent stud wall with dense board
Doors slamming next doorImpact through structureIsolated wall lining and flanking sealing
Washing machine vibrationImpactAnti-vibration mats and isolating the appliance
Sound only near sockets or chimneyAirborne via gapsFlanking survey and gap sealing

Treating airborne noise

For airborne noise through a party wall, a resilient wall lining or independent stud wall is the standard approach. A slim resilient system fixes acoustic clips or bars to the wall, holds dense board away from it, and fills the gap with acoustic mineral wool. An independent stud wall builds a separate frame that does not touch the wall at all. Two layers of dense acoustic plasterboard with staggered joints, finished and sealed with acoustic sealant at the edges, add the mass.

Low frequency noise such as bass and deep voices is the hardest to stop, because it needs more mass and larger air gaps than higher frequencies. That is where independent systems perform better than slim ones.

  • Add mass with dense acoustic plasterboard, often two layers
  • Decouple the new surface using clips, resilient bars or a separate frame
  • Absorb sound in the cavity with acoustic mineral wool
  • Seal perimeter gaps with acoustic sealant
  • Treat sockets and switches with acoustic putty pads or surface boxes

Treating impact noise

Impact noise is treated best at its source. On a timber floor, the boards are lifted, acoustic insulation is laid between joists, and a resilient layer such as an acoustic mat or a floating floor panel is fitted on top before the floor finish. On concrete floors, a resilient underlay beneath the finish helps significantly. Many flat leases require an acoustic underlay or landlord consent before hard flooring is laid, so check yours before changing floor finishes.

If you cannot work on the floor above, a ceiling system that is isolated from the joists, using resilient bars or independent joists, with a filled void and dense board, reduces impact noise. It will not remove it completely, because some vibration still passes through walls.

Why flanking matters for both

Flanking is sound that bypasses the treated wall or ceiling. Airborne flanking travels through gaps, shared floor voids, chimney breasts and loft spaces. Impact flanking travels through joists and walls that run continuously between properties. A flanking survey looks for those paths, and sealing them is often a cheap but important part of any soundproofing job. Ignoring flanking is the main reason people spend money on a new wall and still hear noise.

Matching the budget to the problem

Once you know which type of noise is the main problem, you can spend money where it does the most good. If you mostly hear voices and television through a party wall, a well built wall system with sealed sockets is the priority, and a slim resilient system is often enough. If the problem is bass from a neighbour's speakers, an independent stud system with a wider cavity is worth the extra cost and space.

If footsteps from above are the issue and you can reach the floor upstairs, an acoustic floor there will usually beat any ceiling work below. If you cannot, plan a ceiling system with the old ceiling removed and the void filled, and accept that it will reduce rather than remove the thuds. Where noise seems to appear only in certain spots, such as next to a chimney breast or around sockets, start with a flanking survey before spending on a full wall or ceiling. A specialist can listen in the room at the times the noise happens and recommend the smallest job that will work.

Questions people also ask

Does egg box foam soundproof a room?

No. Foam panels and egg boxes absorb some echo inside a room, which can improve how it sounds, but they add almost no mass and do not stop sound passing through walls. Reducing noise between rooms needs mass, decoupling and sealing, typically with dense board on a resilient or independent system.

Can footstep noise be reduced from below?

Partly. A ceiling isolated from the joists, with acoustic insulation in the void and dense board, reduces footstep noise noticeably. Impact noise is still best treated on the floor above with an acoustic floor or underlay, because some vibration travels through walls and around the ceiling.

What is the hardest noise to soundproof?

Low frequency noise such as bass from speakers, deep voices and heavy footsteps is the most difficult. It needs more mass, wider cavities and better decoupling than higher frequency sound. Independent stud systems with two layers of dense board perform best, and flanking paths must be sealed.

Written and checked by the Soundproofing team. Read our editorial policy.

Get a free soundproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote