Soundproofing glossary
The terms you'll come across, explained in plain English.
- Acoustic clip
- A fixing with a rubber or elastomer isolating element that holds metal channel away from a wall or ceiling, used in slim soundproofing systems.
- Acoustic mineral wool
- A dense insulation made from rock or glass fibres, fitted into wall cavities and floor voids to absorb sound and reduce resonance.
- Acoustic plasterboard
- Plasterboard with a denser core than standard board. Its extra mass reduces sound transmission, and it is often used in two layers.
- Acoustic putty pad
- A mouldable pad wrapped around the back of electrical socket and switch boxes to restore the sound insulation of a wall where the box is cut in.
- Acoustic sealant
- A flexible sealant used to close gaps at the edges of walls, ceilings and around services, preventing sound leaking through air paths.
- Airborne noise
- Sound that travels through the air before reaching a wall or floor, such as voices, television, music and barking. It is reduced by mass, decoupling and sealing gaps.
- Decoupling
- Separating a new wall or ceiling surface from the existing structure so vibration cannot pass directly through, using clips, resilient bars or an independent frame.
- DnT,w + Ctr
- The measure of airborne sound insulation used in Approved Document E, in decibels. Higher numbers mean better performance, with a correction for low frequency noise.
- Flanking transmission
- Sound that bypasses a soundproofed wall or floor by travelling through connected structure, gaps, floor voids, chimney breasts or services.
- Floating floor
- A floor surface laid on a resilient layer so it is not rigidly fixed to the structure below, reducing impact noise reaching the room underneath.
- Impact noise
- Sound created when something strikes the building structure, such as footsteps, dropped objects and slammed doors. It travels through floors and walls and is best treated at its source.
- Independent stud wall
- A new wall frame built a short distance in front of an existing wall without touching it, filled with insulation and finished with dense board. It gives high sound insulation.
- L'nT,w
- The measure of impact sound transmission through floors used in Approved Document E, in decibels. Lower numbers mean less footstep noise reaches the room below.
- Pre-completion sound testing
- On-site tests carried out when building work is finished to check separating walls and floors meet Approved Document E sound insulation values.
- Resilient bar
- A thin, flexible metal channel fixed to joists or studs. Plasterboard is screwed only into the bar, which reduces vibration passing from the structure to the board.
Get a free soundproofing quote
Tell us what you need and we'll come back with a clear price.
Request a quote