Soundproofing

Soundproofing

Ceiling Soundproofing

Acoustic ceilings using resilient bars, hangers or independent joists to cut footsteps and voices from the flat above.

Free Soundproofing quote

No obligation. We only use your details to reply about this job.

Ceiling Soundproofing — Soundproofing

What's involved

Noise from upstairs comes through as both airborne sound and impact. The installer usually takes down the existing ceiling or builds below it. Acoustic mineral wool is laid between the joists, then a resilient system is fitted: resilient bars, acoustic hangers that suspend a metal grid on rubber isolators, or a fully independent ceiling on its own joists. Two layers of acoustic plasterboard are screwed to the system, with joints staggered and edges sealed. Downlights are avoided or fitted with acoustic hoods, as every hole leaks sound. Ceiling height drops by 50 to 150 mm depending on the system. Expect three to five days for a typical room, as old ceiling removal is messy. You need to clear the room fully, as dust from old lath and plaster ceilings is heavy.

How we handle it

  1. Describe the noise

    Use the quote form to tell us what you hear, where it comes from, when and the size of the room. Voices and TV need a different solution from footsteps and doors.

  2. Survey and recommend

    A local installer inspects the wall, floor or ceiling, checks for flanking paths and explains which system suits your noise and space. You get a fixed written price.

  3. Prepare the room

    Furniture, radiators, skirting and sockets are removed from the affected surface, and floors and other walls are protected from dust.

  4. Install the system

    Frames, resilient bars or hangers go up, acoustic wool fills the cavities, two layers of dense board are fixed and every edge and penetration is sealed.

  5. Finish and reinstate

    The new surface is skimmed or taped, skirting, sockets and radiators are refitted, and the room is cleaned ready for decorating.

Price guide

Soundproofing costs depend on the surface treated, the system used and the size of the room. Independent walls and ceilings perform best but cost more and take more space than slim systems. Removing old ceilings and moving radiators adds to the job. We provide a fixed price after survey, including plastering and making good.

  • Flanking survey and gap sealing: £250–£650. Finding and sealing gaps, sockets, chimney openings and loft voids.
  • Internal stud wall upgrade: £700–£1,500. Filling the cavity with acoustic wool and reboarding one side with dense board.
  • Timber floor soundproofing: £1,200–£2,800. Lifting boards, acoustic wool between joists and a resilient floating floor layer.

Questions about ceiling soundproofing

How much does soundproofing cost in the UK?

Soundproofing a party wall in a typical bedroom costs around £1,200 to £3,200 depending on the system. Ceilings usually cost £1,800 to £3,800 because the old ceiling often has to come down. Floors cost £1,200 to £2,800. Sealing flanking gaps alone can cost as little as £250.

How much space does soundproofing take up?

Slim resilient wall systems take around 50 to 75 mm. Independent stud walls usually take 75 to 125 mm. Acoustic ceilings drop by 50 to 150 mm, and floors rise by 15 to 40 mm. Room-within-a-room builds for music can take 200 mm or more from each surface.

How long does soundproofing take?

A single party wall usually takes two to three days including plastering. A ceiling takes three to five days because of removal and dust. Floor treatment typically takes two to three days per room. Full room-within-a-room builds for music or cinema can take two to four weeks.

Get a free soundproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote