Soundproofing

Soundproofing

Home Studio and Cinema Rooms

Room-within-a-room builds for music rooms, rehearsal spaces and home cinemas, with isolated walls, floors, ceilings and doors.

Free Soundproofing quote

No obligation. We only use your details to reply about this job.

Home Studio and Cinema Rooms — Soundproofing

What's involved

Drums, amplified instruments and home cinema subwoofers produce low-frequency sound that ordinary treatments barely touch. The answer is a room within a room: an independent floor floated on acoustic isolators, independent walls standing on that floor, and a ceiling hung from those walls rather than the joists above. Each layer is filled with acoustic wool and boarded with multiple layers of dense board. Doors are pairs of heavy, sealed doors with a gap between them. Ventilation needs silenced ducts, as sealed rooms get hot. Inside, absorption and bass traps control echo, which is acoustic treatment rather than soundproofing. A full build takes two to four weeks and loses 200 to 300 mm on each surface. You need to plan power, ventilation and cable routes early.

How we handle it

  1. Describe the noise

    Use the quote form to tell us what you hear, where it comes from, when and the size of the room. Voices and TV need a different solution from footsteps and doors.

  2. Survey and recommend

    A local installer inspects the wall, floor or ceiling, checks for flanking paths and explains which system suits your noise and space. You get a fixed written price.

  3. Prepare the room

    Furniture, radiators, skirting and sockets are removed from the affected surface, and floors and other walls are protected from dust.

  4. Install the system

    Frames, resilient bars or hangers go up, acoustic wool fills the cavities, two layers of dense board are fixed and every edge and penetration is sealed.

  5. Finish and reinstate

    The new surface is skimmed or taped, skirting, sockets and radiators are refitted, and the room is cleaned ready for decorating.

Price guide

Soundproofing costs depend on the surface treated, the system used and the size of the room. Independent walls and ceilings perform best but cost more and take more space than slim systems. Removing old ceilings and moving radiators adds to the job. We provide a fixed price after survey, including plastering and making good.

  • Timber floor soundproofing: £1,200–£2,800. Lifting boards, acoustic wool between joists and a resilient floating floor layer.
  • Internal stud wall upgrade: £700–£1,500. Filling the cavity with acoustic wool and reboarding one side with dense board.
  • Flanking survey and gap sealing: £250–£650. Finding and sealing gaps, sockets, chimney openings and loft voids.

Questions about home studio and cinema rooms

What is the difference between airborne and impact noise?

Airborne noise travels through the air, such as voices, TV, music and dogs barking, then makes walls vibrate. Impact noise comes from something striking the structure, such as footsteps, doors slamming or furniture moving. Airborne noise is tackled with mass and decoupling; impact noise is best stopped at source with a resilient floor.

Can I soundproof a wall without losing much space?

Yes, but with less benefit. Slim systems using resilient bars or acoustic panels fixed to the wall take 30 to 75 mm and still help with voices and TV. They perform less well than independent walls, especially at low frequencies. Sealing gaps and sockets first gives a lot of improvement for very little space.

Do acoustic foam panels soundproof a room?

No. Acoustic foam panels absorb sound inside a room, reducing echo and improving clarity, but they do almost nothing to stop sound passing through a wall to the neighbours. Real soundproofing needs mass, decoupling, dense insulation and airtight sealing. Foam is useful as acoustic treatment in studios, not as soundproofing.

Get a free soundproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote