Soundproofing

Soundproofing

Flanking and Gap Sealing

Finding and sealing the hidden paths sound takes around walls and floors: gaps, joists, chimney breasts, sockets and pipes.

Free Soundproofing quote

No obligation. We only use your details to reply about this job.

Flanking and Gap Sealing — Soundproofing

What's involved

Sound travels the easiest route, not just straight through a wall. Flanking paths include gaps at the edges of floors, shared floor joists that run through the party wall, open chimney breasts, back-to-back sockets, pipe penetrations and loft spaces with no separating wall. Even a 1 mm gap can noticeably reduce performance. The installer inspects the room, the loft and under floors, then seals gaps with acoustic sealant, packs voids with mineral wool, closes chimney openings and may build a separating wall in a shared loft. This work is often done alongside wall or ceiling soundproofing, but sometimes sealing alone gives a useful improvement at low cost. Most jobs take half a day to a day. You need to provide loft access and lift carpets at the skirting if asked.

How we handle it

  1. Describe the noise

    Use the quote form to tell us what you hear, where it comes from, when and the size of the room. Voices and TV need a different solution from footsteps and doors.

  2. Survey and recommend

    A local installer inspects the wall, floor or ceiling, checks for flanking paths and explains which system suits your noise and space. You get a fixed written price.

  3. Prepare the room

    Furniture, radiators, skirting and sockets are removed from the affected surface, and floors and other walls are protected from dust.

  4. Install the system

    Frames, resilient bars or hangers go up, acoustic wool fills the cavities, two layers of dense board are fixed and every edge and penetration is sealed.

  5. Finish and reinstate

    The new surface is skimmed or taped, skirting, sockets and radiators are refitted, and the room is cleaned ready for decorating.

Price guide

Soundproofing costs depend on the surface treated, the system used and the size of the room. Independent walls and ceilings perform best but cost more and take more space than slim systems. Removing old ceilings and moving radiators adds to the job. We provide a fixed price after survey, including plastering and making good.

  • Party wall, independent stud system: £1,800–£3,200. Free-standing frame, acoustic wool and double acoustic board for best wall performance.
  • Party wall, slim resilient system: £1,200–£2,200. Typical bedroom wall with resilient bars, acoustic wool and two layers of dense board.
  • Flanking survey and gap sealing: £250–£650. Finding and sealing gaps, sockets, chimney openings and loft voids.

Questions about flanking and gap sealing

How much does soundproofing cost in the UK?

Soundproofing a party wall in a typical bedroom costs around £1,200 to £3,200 depending on the system. Ceilings usually cost £1,800 to £3,800 because the old ceiling often has to come down. Floors cost £1,200 to £2,800. Sealing flanking gaps alone can cost as little as £250.

Do I need permission to soundproof my home?

You do not need planning permission to soundproof inside your home. If you live in a leasehold flat, your lease may require consent for work on floors or ceilings. Converting a building into flats triggers Building Regulations sound insulation requirements and usually pre-completion sound testing.

What is the difference between airborne and impact noise?

Airborne noise travels through the air, such as voices, TV, music and dogs barking, then makes walls vibrate. Impact noise comes from something striking the structure, such as footsteps, doors slamming or furniture moving. Airborne noise is tackled with mass and decoupling; impact noise is best stopped at source with a resilient floor.

Get a free soundproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote