Soundproofing

Soundproofing

Floor Soundproofing

Acoustic floor systems under carpet, laminate or engineered wood to reduce footsteps and voices reaching the room below.

Free Soundproofing quote

No obligation. We only use your details to reply about this job.

Floor Soundproofing — Soundproofing

What's involved

Floor treatment is the best way to stop impact noise at source. On timber floors, the installer lifts the boards, fills between the joists with acoustic mineral wool and may add acoustic mass layers. A resilient layer, such as acoustic mat or deck, then goes over the joists or existing boards, followed by a new floating floor of chipboard or acoustic panels. On concrete floors, a thinner acoustic underlay or floating screed system is used. Hard floors such as laminate and engineered wood carry footsteps far more than carpet, so leases on flats often require an acoustic underlay. Doors may need trimming because the floor rises by 15 to 40 mm. A typical room takes two to three days. You need to empty the room and decide on the final floor finish beforehand.

How we handle it

  1. Describe the noise

    Use the quote form to tell us what you hear, where it comes from, when and the size of the room. Voices and TV need a different solution from footsteps and doors.

  2. Survey and recommend

    A local installer inspects the wall, floor or ceiling, checks for flanking paths and explains which system suits your noise and space. You get a fixed written price.

  3. Prepare the room

    Furniture, radiators, skirting and sockets are removed from the affected surface, and floors and other walls are protected from dust.

  4. Install the system

    Frames, resilient bars or hangers go up, acoustic wool fills the cavities, two layers of dense board are fixed and every edge and penetration is sealed.

  5. Finish and reinstate

    The new surface is skimmed or taped, skirting, sockets and radiators are refitted, and the room is cleaned ready for decorating.

Price guide

Soundproofing costs depend on the surface treated, the system used and the size of the room. Independent walls and ceilings perform best but cost more and take more space than slim systems. Removing old ceilings and moving radiators adds to the job. We provide a fixed price after survey, including plastering and making good.

  • Party wall, slim resilient system: £1,200–£2,200. Typical bedroom wall with resilient bars, acoustic wool and two layers of dense board.
  • Flanking survey and gap sealing: £250–£650. Finding and sealing gaps, sockets, chimney openings and loft voids.
  • Internal stud wall upgrade: £700–£1,500. Filling the cavity with acoustic wool and reboarding one side with dense board.

Questions about floor soundproofing

How much does soundproofing cost in the UK?

Soundproofing a party wall in a typical bedroom costs around £1,200 to £3,200 depending on the system. Ceilings usually cost £1,800 to £3,800 because the old ceiling often has to come down. Floors cost £1,200 to £2,800. Sealing flanking gaps alone can cost as little as £250.

How much space does soundproofing take up?

Slim resilient wall systems take around 50 to 75 mm. Independent stud walls usually take 75 to 125 mm. Acoustic ceilings drop by 50 to 150 mm, and floors rise by 15 to 40 mm. Room-within-a-room builds for music can take 200 mm or more from each surface.

How long does soundproofing take?

A single party wall usually takes two to three days including plastering. A ceiling takes three to five days because of removal and dust. Floor treatment typically takes two to three days per room. Full room-within-a-room builds for music or cinema can take two to four weeks.

Get a free soundproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote